How to add water for oxygen hydrogen generator -okayenergy

Oxygen hydrogen generator is also called oxyhydrogen generator for wide use such as jewelry welding,acrylic polishing,copper brazing,ampoule sealing etc.When you first buy the generator,you will have some question about how to add water,how to do machine maintenance.

You just add electrolyte and pure water at the first use of oxygen hydrogen generator.After several hours of machine use,water lever is lower than water standard line,You just add pure water/distilled water/cold boiled water but not mineral water.
Attention: KOH or NaOH is dangerous.When making electrolyte liquid,it will release hot temperature.Please wait some time for cooling.

How to add water?
1. Turn off the torch.
2. Switch off the power and open the valve on the torch to let out the remaining gas.3. Screw off the top cover.4. Add water close to the “high” line.5. Screw on the cover and switch on the machine, and it can work again.

How to do machine maintenance?
You should wash the electrolysis tank and making electrolyte liquid every three months.

oxygen hydrogen generator OH400